Deep Cleaning the Print Head - MX532

This article shows how to deeply clean the print head of the PIXMA MX532. If standard print head cleanings do not resolve print quality problems, deeply cleaning the print head may resolve the problem.

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary.

1. Make sure that the power is turned on.

2. Clean the print head deeply.

   1. Press the Setup button.

      The Setup menu screen will appear.

   2. Use the or button to select Maintenance, then press the OK button.

   3. Use the or button to select Deep cleaning, then press the OK button.

      

      The machine starts cleaning the print head deeply.

      Do not perform any other operations until the machine completes the deep cleaning of the print head. This takes about 1 to 2 minutes.

3. Check the print head condition.

   To check the print head condition, print the nozzle check pattern.

If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours. Do not unplug the power cord when turning off the power.

If the problem is still not resolved, replace the FINE cartridge with a new one.

If the problem is still not resolved after replacing the FINE cartridge, service is required.
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account