Salesforce

Wireless Setup Using the Printer's Display Panel - PIXMA MX Models

Printable View
« Go Back

Information

 
TitleWireless Setup Using the Printer's Display Panel - PIXMA MX Models
URL NameART117459
Description

Connect your printer to a wireless network directly from the printer display panel.

Solution

You can connect wirelessly to your network right from the printer's display panel.


Complete the standard setup

  1. Press the setup button on the printer display.

    Setup button

  2. When the setup menu appears, use the left and right arrows to select Wireless LAN setup.

    Wireless LAN Setup

  3. Press OK.

  4. The printer will search for an access point (wireless router). If a message tells you to press the WPS button on the access point, press the Stop button on the printer.

    Searching for access point

  5. After it completes the search, use the left or right arrows and select Standard setup.

    Standard setup

  6. Press OK.

  7. The printer will search for access points again.

  8. When Select access point appears, use the left or right arrows to select the wireless network to connect to.

    My network

  9. Press the OK button twice.

  10. If there is a passphrase (a security key) for the router, you will be prompted to enter it. Use the numeric keypad to do this. To the right of Enter passphrase you will see :a

    Enter passphrase

  11. When :a is on the screen, the numeric keypad will display lowercase letters. To enter a letter, press the corresponding key until the letter you want appears. For example, to enter the letter "c" you would press the number 2 three times.

  12. To enter uppercase letters, press the asterisk key once. :A will appear to the right of Enter passphrase.

    Tone key  Enter passphrase

  13. To enter numbers, press the tone key again. :1 will appear to the right of Enter passphrase.

    Enter passphrase

  14. To enter symbols, press the pound key repeatedly until the desired symbol appears on the screen. For example, press the pound key 5 times to enter a blank space.

    symbol key

  15. To delete a character, press the left or right arrows to move the cursor under the character to be deleted. Then press the back key to delete the character.

    back arrow key

  16. After the passphrase has been entered, press OK. The printer will attempt to connect to the wireless network.

  17. If message below appears, press OK to complete the setup.

    Okay

Troubleshooting If the printer fails to connect, a message will appear telling you that the unit failed to connect to the access point. Press OK and verify that the network key has been entered correctly. Make any changes needed and press OK to attempt to connect again.
Powered by