Printing Network Settings
Use the operation panel to print the printer's current network settings.
Important
- The network settings printout contains important information about your network. Handle it with care.
-
Make sure printer is turned on.
If the HOME screen is not displayed, press the HOME button.
-
Load three sheets of A4 or Letter-sized plain paper.
-
Select
(Network status) icon.
The menu screen appears.
-
Check the message and select Yes.
-
Select Print details.
-
Select Yes.
The printer starts printing network settings information.
The printed network settings information is as follows: (Some setting values are not displayed depending on the printer settings.)
| Item | Description | Setting |
|---|
| Product Information | Product information | – |
| Product Name | Product name | XXXXXXXX |
| ROM Version | ROM version | XXXXXXXX |
| Serial Number | Serial number | XXXXXXXX |
| Wireless LAN | Wireless LAN | Enable/Disable |
| MAC Address | MAC address | XX:XX:XX:XX:XX:XX |
| Infrastructure | Infrastructure | Enable/Disable |
| Connection | Connection status | Active/Inactive |
| SSID | SSID | Wireless LAN SSID |
| Channel | Channel | XX (1 to 11) |
| Encryption | Encryption method | None/WEP/TKIP/AES |
| WEP Key Length | WEP key length (bits) | Inactive/128/64 |
| Authentication | Authentication method | None/auto/open/shared/WPA-PSK/WPA2-PSK |
| Signal Strength | Signal strength | 0 to 100 [%] |
| TCP/IPv4 | TCP/IPv4 | Enable |
| IP Address | IP address | XXX.XXX.XXX.XXX |
| Subnet Mask | Subnet mask | XXX.XXX.XXX.XXX |
| Default Gateway | Default gateway | XXX.XXX.XXX.XXX |
| TCP/IPv6 | TCP/IPv6 | Enable/Disable |
| Link Local Address | Link local address | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| Link Local Prefix Length | Link local prefix length | XXX |
| Stateless Address1 | Stateless address 1 | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| Stateless Prefix Length1 | Stateless prefix length 1 | XXX |
| Stateless Address2 | Stateless address | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| Stateless Prefix Length2 | Stateless prefix length 2 | XXX |
| Stateless Address3 | Stateless address 3 | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| Stateless Prefix Length3 | Stateless prefix length 3 | XXX |
| Stateless Address4 | Stateless address 4 | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| Stateless Prefix Length4 | Stateless prefix length 4 | XXX |
| Default Gateway1 | Default gateway 1 | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| Default Gateway2 | Default gateway 2 | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| Default Gateway3 | Default gateway 3 | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| Default Gateway4 | Default gateway 4 | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| IPsec | IPsec setting | Active |
| Security Protocol | Security method | ESP/ESP & AH/AH |
| Wireless Direct | Wireless direct | Enable/Disable |
| Connection | Connection status | Active/Inactive |
| SSID | SSID | Wireless Direct SSID |
| Password | Password | Wireless Direct password (10 alphanumeric characters) |
| Channel | Channel | 3 |
| Encryption | Encryption method | AES |
| Authentication | Authentication method | WPA2-PSK |
| TCP/IPv4 | TCP/IPv4 | Enable |
| IP Address | IP address | XXX.XXX.XXX.XXX |
| Subnet Mask | Subnet mask | XXX.XXX.XXX.XXX |
| Default Gateway | Default gateway | XXX.XXX.XXX.XXX |
| TCP/IPv6 | TCP/IPv6 | Enable/Disable |
| Link Local Address | Link local address | XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX |
| Link Local Prefix Length | Link local prefix length | XXX |
| IPsec | IPsec setting | Active |
| Security Protocol | Security method | – |
| Other Settings | Other settings | – |
| Printer Name | Printer name | Printer name (Up to 15 alphanumeric characters) |
| Direct Conn. DevName | Device name for wireless direct (Up to 32 characters) | Device name for wireless direct |
| WSD Printing | WSD printing setting | Enable/Disable |
| WSD Timeout | Timeout | 1/5/10/15/20 [min] |
| LPD Printing | LPD printing setting | Enable/Disable |
| RAW Printing | RAW printing setting | Enable/Disable |
| Bonjour | Bonjour setting | Enable/Disable |
| Bonjour Service Name | Bonjour service name | Bonjour service name (Up to 52 alphanumeric characters) |
| LLMNR | LLMNR setting | Enable/Disable |
| SNMP | SNMP setting | Enable/Disable |
| PictBridge Commun. | PictBridge communication | Enable/Disable |
| DNS Server | Obtain DNS server address automatically | Auto/Manual |
| Primary Server | Primary server address | XXX.XXX.XXX.XXX |
| Secondary Server | Secondary server address | XXX.XXX.XXX.XXX |
| Proxy Server | Proxy server setting | Enable/Disable |
| Proxy Address | Proxy address | XXXXXXXXXXXXXXXXXXXX |
| Proxy Port | Proxy port specification | 1 to 65535 |
| Cert. Fingerprt(SHA-1) | Certificate fingerprint(SHA-1) | XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX |
| Cert. Fingerprt(SHA-256) | Certificate fingerprint(SHA-256) | XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX |
("XX" represents alphanumeric characters.)
TS5020 Page
