Easy Wireless Connect allows the printer to accept wireless network information from a computer or a mobile device. Follow the steps below to start Easy Wireless Connect mode.
Easy Wireless Connect
If printer is in the middle of a process, like print head cleaning or print head alignment, wait for it to finish before you start the setup.
-
Make sure the printer is powered on. The ON lamp (A) will be lit.
-
If the screen shown below appears, press the Stop button (B). If not displayed, proceed to the next step.
-
Press and hold the Wireless connect button (C) for about three seconds.
-
When the printer preparation is complete, the screen below appears.
-
Once the printer is in Easy Wireless Connect mode, you will need to run the setup program from a computer or use Canon PRINT Inkjet / SELPHY from a mobile device to send the network information to the printer.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________