Before Printing on Art Paper - PRO-200

This article provides information you'll need to know befure using art paper with the PIXMA PRO-200.

When using art paper, dust is liable to be generated. It is therefore recommended that paper dust be removed on art paper just before printing.

You will need a soft hair brush (or similar brush used to clean office automation equipment).

The wider the brush, the more effective it will be.

OK - soft brush made from material such as polypropylene, polyethylene, horse hair or goat hair.

 Be sure not to use brushes as shown below. The printing surface may be damaged.

Not OK - brush made from hard material, cloth or washcloth, sticky and abrasive materials.

Paper dust removal procedure:

1. Check that the brush is not wet and free from dust or dirt.

2. Brush the overall printing surface carefully in one direction.

   

    Be sure to brush all the way across the paper; don't start brushing at the middle or stop halfway.

    Try to avoid touching the printing surface as much as possible.

3. To complete the removal of paper dust, brush the paper in the other direction from top to bottom.

   

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

____________________________________________________________________________________________