Salesforce

PIXMA PRO-200 Easy Wireless Connect Setup - Windows

Printable View
« Go Back

Information

 
TitlePIXMA PRO-200 Easy Wireless Connect Setup - Windows
URL NameART178986
Description

Use Easy wireless connect to establish the printer's wireless connection to your network.

Solution

Wireless Setup - Windows** Computers

**Instructions in this article are for setup on a Windows computer.  If setting up on a Mac, click here for instructions

To be able to use your printer to print wirelessly on a Windows computer, the printer must first be connected to the wireless network. Then, drivers need to be installed on the computer.  The instructions / screenshots below show the setup program steps when using the Easy wireless connect method to connect to the wireless network.

The setup process consists of 2 parts: 

  1. Starting Easy wireless connect on the printer, and

  2. Downloading and running the setup file to install the drivers and software.

Start Easy wireless connect on the printer

Prior to starting setup on the computer, start Easy wireless connect on the printer. Then complete the setup on the computer. 
See the procedure below to start Easy wireless connect.

  1. With the printer powered on and displaying the HOME screen, use the arrows to select LAN settings, then press the OK button.

    Figure: LCD

  2. Wi-Fi will be selected. Press the OK button.

    Figure: LCD

  3. On the Wi-Fi setting list screen, press the OK button.

    Figure: LCD

  4. Select Wi-Fi setup and press the OK button.

    Figure: LCD

  5. Easy wireless connect will be selected. Press the OK button.

    Figure: LCD

  6. Press the OK button.

    Figure: LCD

    The printer will be in Easy wireless connect mode.

    Figure: LCD
     

Download and run the setup file.*

Get the Setup File

  1. Run the setup file and click Start Setup.

    Click Start Setup (outlined in red) to proceed

  1. Read the network security notice and click Next.

    Click Next (outlined in red) to proceed

    The installer will acquire information on the latest driver and software for the printer. This may take several minutes.

    Acquiring information on the latest driver and software

  2. Read the license agreement. Select Yes to proceed.  If you click No, the installation will not proceed.

    Click Yes (outlined in red) to proceed

  3. Select Agree or Do Not Agree to the information request.

    Click Agree or Do not agree (both outlined in red) to proceed

  4. This message appears if you selected Do not agree. Click OK to proceed.

    Click OK (outlined in red) to proceed

  5. Select Yes to confirm the connection method.

    Click Yes (outlined in red) to proceed

  6. When the connection is completed, click Next.

    Click Next (outlined in red) to proceed

     If your printer is not detected, make sure that the computer has reconnected to the correct network. Also, you may need to temporarily disable any firewall software, or you may need to open blocked ports in the firewall. If your PC is connected to a VPN (Virtual Private Network), temporarily disconnect from the VPN and try the setup again. Also, if you are using a dual-band router, further troubleshooting information can be found here.

  7. The printer driver will be downloaded and installed. This may take several minutes.

    The MP Drivers will be downloaded and installed

  8. Click Next.

    Click Next (outlined in red) to proceed

  9. Click Continue online. The installer will close.

    Click Continue online (outlined in red) to close the installer

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________
Powered by