Salesforce

Printing Out Network Setting Information (LAN Details) - PRO-200

« Go Back

Information

 
TitlePrinting Out Network Setting Information (LAN Details) - PRO-200
URL NameART179146
Description

This article explains how to print out the network setting information for the PIXMA PRO-200. An example of this page is attached to this article.

Solution

Use the operation panel to print the printer's current network settings.

 The network settings printout contains important information about your network. Handle it with care.

  1. Check that printer is turned on and display the Home screen.

    If the HOME screen is not displayed, press the HOME button.

  2. Load three sheets of A4 or Letter-sized plain paper in the top feed.

  3. Select LAN settings on the Home screen and press the OK button.

  4. Select Print details and press the OK button.

  5. Check the displayed message, select Yes and press the OK button.

  6. When the confirmation screen for printing passwords appears, select Yes or No and press the OK button.

    The printer starts printing the network setting information.

The following information on the printer's network setting is printed out. (Some setting values are not displayed depending on the printer settings.)

Item Number

Item

Description

Setting

1

Product Information

Product information

1-1

Product Name

Product name

XXXXXXXX

1-2

ROM Version

ROM version

XXXXXXXX

1-3

Serial Number

Serial number

XXXXXXXX

1-4

Default Password

Default password (to access Remote UI)

XXXXXXXX

2

Network Diagnostics

Network diagnostics

2-1

Diagnostic Result

Diagnostic result

XXXXXXXX

2-2

Result Codes

Result codes

XXXXXXXX

2-3

Result Code Details

Result code details

http://canon.com/ijnwt

3

Wireless LAN

Wireless LAN

Enable/Disable

3-2

Infrastructure

Infrastructure

Enable/Disable

3-2-1

Signal Strength

Signal strength

0 to 100 [%]

3-2-2

Link Quality

Link quality

0 to 100 [%]

3-2-3

Frequency

Frequency

XX (GHz)

3-2-4

MAC Address

MAC address

XX:XX:XX:XX:XX:XX

3-2-5

Connection

Connection status

Active/Inactive

3-2-6

SSID

SSID

Wireless LAN network name (SSID)

3-2-7

Channel

Channel

XXX (1 to 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165)

3-2-8

Encryption

Encryption method

None/WEP/TKIP/AES

3-2-9

WEP Key Length

WEP key length (bits)

Inactive/128/64

3-2-10

Authentication

Authentication method

None/auto/open/shared/WPA-PSK/WPA2-PSK

3-2-11

TCP/IPv4

TCP/IPv4

Enable/Disable

3-2-12

IP Address

IP address

XXX.XXX.XXX.XXX

3-2-13

Subnet Mask

Subnet mask

XXX.XXX.XXX.XXX

3-2-14

Default Gateway

Default gateway

XXX.XXX.XXX.XXX

3-2-15

TCP/IPv6

TCP/IPv6

Enable/Disable

3-2-16

Link Local Address

Link local address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-17

Link Local Prefix Length

Link local prefix length

XXX

3-2-18

Stateless Address1

Stateless address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-19

Stateless Prefix Length1

Stateless prefix length 1

XXX

3-2-20

Stateless Address2

Stateless address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-21

Stateless Prefix Length2

Stateless prefix length 2

XXX

3-2-22

Stateless Address3

Stateless address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-23

Stateless Prefix Length3

Stateless prefix length 3

XXX

3-2-24

Stateless Address4

Stateless address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-25

Stateless Prefix Length4

Stateless prefix length 4

XXX

3-2-26

Default Gateway1

Default gateway 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-27

Default Gateway2

Default gateway 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-28

Default Gateway3

Default gateway 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-29

Default Gateway4

Default gateway 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-30

Manual Setting

Manual Setting

Enable/Disable

3-2-31

IP Address

IP Address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-2-32

Subnet Prefix Length

Subnet Prefix Length

XXX

3-2-33

IPsec

IPsec setting

Active/Inactive

3-2-34

Security Protocol

Security method

ESP/ESP & AH/AH/Blank (not selected)

3-2-35

Wireless LAN DRX

Discontinuous reception (wireless LAN)

Enable/Disable

3-3

Wireless Direct

Operation mode for Wireless Direct

Enable/Disable

3-3-1

MAC Address

MAC address

XX:XX:XX:XX:XX:XX

3-3-2

Connection

Connection status

Active/Inactive

3-3-3

SSID

SSID

Wireless Direct network name (SSID)

3-3-4

Password

Password

Wireless Direct password

3-3-5

Channel

Channel

3

3-3-6

Encryption

Encryption method

AES

3-3-7

Authentication

Authentication method

WPA2-PSK

3-3-8

TCP/IPv4

TCP/IPv4

Enable/Disable

3-3-9

IP Address

IP address

XXX.XXX.XXX.XXX

3-3-10

Subnet Mask

Subnet mask

XXX.XXX.XXX.XXX

3-3-11

Default Gateway

Default gateway

XXX.XXX.XXX.XXX

3-3-12

TCP/IPv6

TCP/IPv6

Enable/Disable

3-3-13

Link Local Address

Link local address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

3-3-14

Link Local Prefix Length

Link local prefix length

XXX

3-3-15

IPsec

IPsec setting

Active/Inactive

3-3-16

Security Protocol

Security method

ESP/ESP & AH/AH/Blank (not selected)

3-3-17

Wireless LAN DRX

Discontinuous reception (wireless direct)

Enable/Disable

4

Wired LAN

Wired LAN

Enable/Disable

4-1

MAC Address

MAC Address

XX:XX:XX:XX:XX:XX

4-2

Connection

Connection

Active/Inactive

4-3

TCP/IPv4

Operation mode for TCP/IPv4

Enable/Disable

4-4

IP Address

IP Address

XXX.XXX.XXX.XXX

4-5

Subnet Mask

Subnet Mask

XXX.XXX.XXX.XXX

4-6

Default Gateway

Default Gateway

XXX.XXX.XXX.XXX

4-7

TCP/IPv6

Operation mode for TCP/IPv6

Enable/Disable

4-8

Link Local Address

Link Local Address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-9

Link Local Prefix Length

Link Local Prefix Length

XXX

4-10

Stateless Address1

Stateless Address1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-11

Stateless Prefix Length1

Stateless Prefix Length1

XXX

4-12

Stateless Address2

Stateless Address2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-13

Stateless Prefix Length2

Stateless Prefix Length2

XXX

4-14

Stateless Address3

Stateless Address3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-15

Stateless Prefix Length3

Stateless Prefix Length3

XXX

4-16

Stateless Address4

Stateless Address4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-17

Stateless Prefix Length4

Stateless Prefix Length4

XXX

4-18

Default Gateway1

Default Gateway1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-19

Default Gateway2

Default Gateway2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-20

Default Gateway3

Default Gateway3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-21

Default Gateway4

Default Gateway4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-22

Manual Setting

Manual Setting

Enable/Disable

4-23

IP Address

IP Address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

4-24

Subnet Prefix Length

Subnet Prefix Length

XXX

4-25

IPsec

IPsec

Active/Inactive

4-26

Security Protocol

Security Protocol

ESP/ESP & AH/AH/Blank (not selected)

4-27

Wired LAN DRX

Wired LAN DRX

Enable/Disable

5

Other Settings

Other settings

5-1

Printer Name

Printer name

Printer name (Up to 15 alphanumeric characters)

5-2

Wireless Direct DevName

Device name for wireless direct

Device name for wireless direct (Up to 32 alphanumeric characters)

5-4

WSD Printing

WSD printing setting

Enable/Disable

5-5

WSD Timeout

Timeout

1/5/10/15/20 [min]

5-6

LPD Printing

LPD printing setting

Enable/Disable

5-7

RAW Printing

RAW printing setting

Enable/Disable

5-9

Bonjour

Bonjour setting

Enable/Disable

5-10

Bonjour Service Name

Bonjour service name

Bonjour service name (Up to 52 alphanumeric characters)

5-11

LLMNR

LLMNR setting

Enable/Disable

5-12

SNMP

SNMP setting

Enable/Disable

5-13

PictBridge Commun.

PictBridge Communication

Enable/Disable

5-14

DNS Server

Obtain DNS server address automatically

Auto/Manual

5-15

Primary Server

Primary server address

XXX.XXX.XXX.XXX

5-16

Secondary Server

Secondary server address

XXX.XXX.XXX.XXX

5-17

Proxy Server

Proxy server setting

Enable/Disable

5-18

Proxy Address

Proxy address

XXXXXXXXXXXXXXXXXXXX

5-19

Proxy Port

Proxy port specification

1 to 65535

5-20

Cert. Fingerprt(SHA-1)

Certificate fingerprint(SHA-1)

xxxxxxxx xxxxxxxx xxxxxxxx

xxxxxxxx xxxxxxxx

5-21

Cert. Fingerprt(SHA-256)

Certificate fingerprint(SHA-256)

xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx

xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx

7

Web Services

Web Services

7-1

Unsent Usage Logs

Number of unsent usage logs

0 to 200

7-2

Usage Log Last Sent

Last date when usage log was sent

XXXXXXXX

7-3

Web Service Status

Registration status

Not set/Disabled/Registration pending/Registered

7-4

Log Transmission Status

Transmission result

Not activated/Processing/Server error/Connection error/Timeout error/Error/Awaiting server response/Active

("XX" represents alphanumeric characters.)

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________


Powered by