Salesforce

PIXMA TR7820 Easy Wireless Connect Setup - Windows

Printable View
« Go Back

Information

 
TitlePIXMA TR7820 Easy Wireless Connect Setup - Windows
URL NameART184405
Description

Use Easy wireless connect to establish the printer's wireless connection to your network.

Solution

Wireless Setup - Windows

To be able to use your printer wirelessly on a Windows PC, the printer must first be connected to the wireless network. Then, software needs to be installed on the computer. The instructions / screenshots below show the setup program steps when using the Easy wireless connect method to connect to the wireless network.

The setup process consists of 2 parts: 

  1. Starting Easy wireless connect on the printer, and

  2. Downloading and running the setup file to install the software.

Start Easy wireless connect on the printer

Prior to starting setup on the computer, start Easy wireless connect on the printer. Then complete the setup on the computer. 
See the procedure below to start Easy wireless connect.

  1. Tap and hold the wireless connect symbol  Wireless connect until the following appears on the screen.

    Figure: Touch screen
     

Download and run the setup file.*

Get the Setup File

After downloading the setup file, open it. If you're prompted to provide permission to open the file, select Open or the appropriate affirmative option.

  1. Select your language, then click OK.

    Select your language, then click OK (outlined in red)

  2. Select your place of residence, then click OK.

    Select your place of residence, then click OK (outlined in red)

  3. Select Start Setup.

    Click Start Setup (outlined in red)

    The installer will check for the latest information related to your printer.

    Checking the latest information

  4. Read the license agreement. Select Yes to proceed.  If you select No, the installation will not proceed.

    Click Yes (outlined in red) to proceed

  5. Select Agree or Do Not Agree to the information request.

    Click Agree or Do not agree (both outlined in red) to proceed

    This message appears if you selected Do not agree. Click OK to proceed.

    Click OK (outlined in red) to proceed

  6. After processing for a few moments, the installer will display the following message. Select Next.

    Click Next (outlined in red) to proceed

    The installer will search for the printer.

    Searching for printers

  7. The installer will ask you to confirm that you want to connect the printer to your wireless router. Select Connect.

    Click Connect (outlined in red)

  8. The computer will communicate with the printer. Please wait.

    Please wait

    After a few moments, the connection will be completed.

    The printer is now connected to the network

     If your printer is not detected, make sure that the computer has reconnected to the correct network. Also, you may need to temporarily disable any firewall software, or you may need to open blocked ports in the firewall. If your PC is connected to a VPN (Virtual Private Network), temporarily disconnect from the VPN and try the setup again. Also, if you are using a dual-band router, further troubleshooting information can be found here.

  9. The installer will download the software and drivers.

    Click Add Printer (outlined in red)

    The MP Drivers will be installed. Please wait.

    Installing the MP Drivers

  10. The printer will be registered into your computer. Please wait.

    Please wait

  11. After processing for a few moments, the following screen will appear. Select Next.

     If desired, select Test Print to print a test page.

    Click Next (outlined in red) to proceed

  12. Select Go to Website. The installer will close.

    Click Go to Website (outlined in red) to close the installer

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Powered by