Adjusting the Flash Output
In M mode, the flash output can be controlled in three steps, starting from FULL, when shooting.
1. Press the <FUNC.> button.
2. Select
(Flash Output) using the
or
button.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot_A510_A520/flash_output_menu.gif)
3. Adjust the flash output using the
or
button.
You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.
4. Press the <FUNC.> button.
5. Shoot the image.
- When the flash output is low, less shadow appears in the image. However, when shooting a wide scene or area, the image will likely be darker due to insufficient light. When adjusting the flash output, consider all the shooting conditions, including the distance to the subject.
- Manual flash does not fire a metering preflash.
|