Article ID: ART119963 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
Paper Handling Instructions Pro9500
Solution
Proper Paper Handling Instructions
Notes:
- Put unused sheets paper back into the package, and store it avoiding heat, humidity, and direct sunlight.
- Be careful not to rub or scratch the surfaces of any types of paper when handling.
- Hold the paper as closely as possible to its edges and try not to touch the printing surface. The print quality may be degraded if the printing surface is smudged with sweat or oil that comes from your hands.
- Do not touch the printed surface until the ink has fully dried. Even when the ink has fully dried, be careful not to touch the printed surface as much as possible when handling. Due to the nature of the pigment ink, the ink on the printed surface may be removed when being rubbed or scratched.
When using 4" x 6" or 5" x 7" sized paper, to prevent paper abrasion, curl the paper in advance.
(1) Print surface
Note: When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper and reduce the print quality.
Bend the paper in the opposite direction, as shown below before loading it into the printer.
(1) Printing surface
-
Place a sheet of paper on the printing side of the paper to be printed on.
Print quality may deteriorate if the print surface is touched by hand.
(1) Print surface
-
To bend the paper, hold the paper in a rounded shape for about 10 seconds.
-
Remove the paper not to be used in printing, and confirm that, when laid flat with the print side up, the center of the paper to be printed on is raised between 2 to 5mm.
(1) Print surface