This section describes how to load originals and copy them to plain paper.

1. Open the front cover (A).
    

2. Extend the paper support (B).
    

3. Load paper vertically WITH THE PRINT SIDE FACING DOWN.

   Push the paper stack all the way to the back of the front tray.

   
   
    

4. Align the paper guides with the paper width.

   
   
    

5. Open the output tray extension (C).
    

6. Open the paper output tray (D).
    

7. Extend the paper output support (E).

   
   
    

8. Open the document cover (F).
    

9. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (G).
    

10. Close the document cover gently.

    
    
     

11. Press the Paper button (H) to light the upper Paper lamp (I).
     

12. Press the Black button or Color button (J).
    
    
     

• To make multiple copies:

  Press the Color button or the Black button repeatedly according to the number of copies you want.

  Press the same button (Color button or Black button) as the one which you previously pressed.
   

• To cancel copying:

  Press the Stop button.

Important

• Do not open the document cover until copying is complete.

Note

• To set the print quality to "Draft" (speed priority)

  You can set the print quality to "Draft" (speed priority) following the procedure below.

  1. Press and hold down Color or Black button for 2 or more seconds in step 12.

     The ON lamp flashes once.
      

  2. Release the button.

     The machine starts copying.
      

  When the print quality is set to "Draft", print speed is given priority over quality. To give priority to quality, press the Color or Black button for less than 2 seconds to copy in the print quality "Standard".

MG3620 / MG3622 Page