You can perform the following tasks related to color calibration for multiple printers connected by a network or USB using the Quick Utility Toolbox.
-
Verifying recommended frequency of color calibration
-
Executing color calibration
-
Verifying progress of color calibration
Note
Important
-
You must load paper into the printer to perform color calibration.
For details on the paper that can be used for color calibration, see "Paper that Can Be Used in Color Calibration" for your model from the Home of the Online Manual.
-
In the Quick Utility Toolbox, select the printer for which you want to perform color calibration, and then click the Calibration button.
The Calibration dialog box appears.
-
Select the Media Type for color calibration.
Note
-
Verify the Status in the Confirmation Message.
The Status in the Confirmation Message will let you know if color calibration is required.
Important
-
If you are not performing color calibration, click the Cancel button.
-
Perform color calibration when replacing the printhead or when you are concerned about differences in color tone.
-
Verify the Paper Source.
The paper sources for which color calibration can be performed are displayed for the paper in Media Type.
If the displayed paper source and the paper loaded to perform color calibration are different, reload the paper in the paper source displayed in Paper Source.
-
Click the OK button.
The color calibration starts and the Calibration Monitor dialog box appears.
Note
-
If you want to stop the color calibration, select the printer and then click the Cancel Calibration button.
-
To close this dialog box, click the button.