Printing the Nozzle Check Pattern from the Operation Panel - MG3020 / MG3022
Article ID: ART166532
|
Date published: 09/12/2016
|
Date last updated: 05/21/2019
Description
This article explains how to print a nozzle check pattern directly from the operation panel on the PIXMA MG3020 / MG3022.
Solution
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
If the remaining ink level is low, the nozzle check pattern will not be printed correctly.Replace the FINE cartridge whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper
Make sure that the power is turned on.
Load a sheet of A4 or Letter-sized plain paper in the rear tray.
Pull out the paper output tray and the output tray extension.
Hold down the Stop button until the Alarm lamp flashes once, then release it immediately. The nozzle check pattern will be printed. Do not perform any other operations until the printer completes the printing of the nozzle check pattern.