Ask a Question

Copy Settings - TS5020

Article ID: ART170381 | Date published: 05/18/2018 | Date last updated: 04/08/2019
 

Description

This article shows the settings that can be adjusted when making copies with the PIXMA TS5020.

 

Solution

You can change the copy settings such as magnification and intensity.
 

Print Settings Screen

 

How to display the print setting screen varies with the copy menu.

  • In Standard copy:

    The following screen is displayed by selecting Settings on the Copy standby screen.



     

  • In Borderless copy:

    The following screen is displayed before copying.



     

Setting Items

You can specify the following setting items.

Use the button to select a setting item and press the OK button to display the settings. Use the button to specify the setting and press the OK button to finalize selection.



 

 Note

  • Depending on the copy menu, some setting items cannot be selected. This section describes the setting items in Copy.

    The setting item which cannot be selected is displayed grayed out.

     

  • Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, and Error details are displayed on the LCD. In this case, select on the upper left on the LCD to check the message and change the setting.
     

  • The settings of the page size, media type, etc. are retained even if the printer is turned off.
     

  • When copying starts in the copy menu that is not available with the specified setting, The specified function is not available with current settings. is displayed on the LCD. Change the setting, following the on-screen instructions.
     

  1. Copies

    Specify the number of copies.
     

  2. Color

    Specify the color mode.
     

  3. Magnif. (Magnification)

    Specify the reduction/enlargement method.
     

  4. Intensity

    Specify the intensity.

    When Auto is selected, the intensity is adjusted automatically according to the originals loaded on the platen glass.
     

  5. Page size

    Select the page size of the loaded paper.
     

  6. Type (Media type)

    Select the media type of the loaded paper.
     

  7. Print qlty (Print quality)

    Adjust print quality according to the original.


     Important

    • If you use Draft with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again.
       

    • Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.
       

  8. Layout

    Select the layout.

TS5020 Page


 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments