Ask a Question

IJ Scan Utility - Sending Scanned Images via E-mail (Windows) - TS6020

Article ID: ART170671 | Date published: 06/07/2018 | Date last updated: 04/09/2019
 

Description

This article explains how to send a scanned image via e-mail with IJ Scan Utility on a Windows PC.

 

Solution

You can send scanned images via e-mail.


 Note

  • The screens for scanning photos are used as examples in the following descriptions.
 

  1. Start IJ Scan Utility.
     

  2. Click Settings....



     

    The Settings dialog box appears.
     

  3. Click Photo Scan.



     

  4. Select Attach to e-mail in Application Settings, then select an e-mail client.


    figure: Settings dialog box


     Note

    • You can add e-mail clients to use for attachments from the pull-down menu.
    • If None (Attach Manually) is selected, manually attach scanned and saved images to e-mail.
       

  5. Click OK.



     

    The IJ Scan Utility main screen appears.
     

     

  6. Click Photo.



     

    Scanning starts.

    When scanning is completed, the specified e-mail client starts and the images will be attached to a new message.


     Note

    • To cancel the scan, click Cancel.
       
    • The scanned images are saved according to the settings made in the Settings dialog box.
       
    • If the Check scan results and specify save settings checkbox is selected in the Settings dialog box, the Save Settings dialog box appears. After you set the save options and click OK, the scanned images are saved and automatically attached to a new message of the specified e-mail client.
       

  7. Specify the recipient, enter the subject and message, then send e-mail.

    Refer to the manual of your e-mail client for e-mail settings

TS6020 Page


 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments