Inserting the Memory Card

(Removing the Memory Card )

Note : When Read/write mode is selected in Read/write attribute under Device settings by using the Operation Panel on the machine, card direct printing cannot be done. After using the Card Slot as the memory card drive of the computer, remove the memory card, then be sure to set Read/write attribute to Read-only mode. When you have edited or processed photos saved in a memory card on a computer, be sure to print them from the computer. If you print using the Operation Panel, the data may not be printed correctly.

1. Turn on the machine.

2. Open the Card Slot Cover.

Push the upper right-hand corner of the Card Slot Cover as illustrated below and open it.

3. Insert one and only one memory card into the Card Slot.

Card Type	Inserting Card
Compact Flash (CF) card Microdrive xD-Picture card*	Insert into the left Card Slot. The Access lamp (A) lights up.
SmartMedia	Insert into the right Card Slot. The Access lamp (A) lights up.
MEMORY STICK MEMORY STICK PRO MEMORY STICK Duo* MEMORY STICK PRO Duo* SD Secure Digital memory card MiniSD Card* MultiMediaCard (ver.3.31)	Insert into the center part of the right Card Slot. The Access lamp (A) lights up.

* Be sure to attach the memory card to the special adapter before inserting it into the Card Slot.

Caution : The memory card will stick out of the Card Slot, but do not force it into the slot any further. Doing so damages the machine and the memory card. Make sure that the memory card is correctly oriented before inserting it into the Card Slot. If you force the memory card into the Card Slot in the wrong orientation, you may damage the memory card and/or the machine.

4. Confirm that the Access lamp has lit up.

5. Close the Card Slot Cover.

---

Removing the Memory Card

Important : If you used the Card Slot as the memory card drive of the computer, you need to do a "safe removal" operation on your computer before physically removing the memory card from your machine.

Right-click the removable disk icon and click 'Eject'. If Eject is not displayed on the screen, make sure that the Access lamp is not flashing, and then remove the memory card.

Drag the icon into the Trash.

1. Open the Card Slot Cover.

Push the upper right-hand corner of the Card Slot Cover and open it.

2. Make sure that the Access lamp is not flashing, then remove the memory card.

Confirm that the Access lamp is not flashing, and hold the part of the memory card that is sticking out to remove it from the machine.

Important : Removing the memory card or turning off the machine while the Access lamp is flashing may damage the data stored in the memory card.

3. Close the Card Slot Cover.