Cannot cut paper. (iPF8000S/iPF9000S/iPF8100/iPF9100)
Article ID: ART119763 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Solution
Cannot cut paper. (iPF8000S/iPF9000S/iPF8100/iPF9100)
Causes
|
Corrective Action
|
There are sheets left on the Ejection Guide . |
Remove the paper. |
There is a foreign object by the Output Tray , obstructing the Cutter Unit . |
Remove the foreign object. |
You are not using the printer under the recommended environmental conditions for the paper. |
Use the printer only where the recommended environmental conditions for the paper are met. Note that various environmental conditions are recommended for various types of paper. |
You are using paper that is not compatible with automatic cutting. |
Cut the roll manually. |
The Cutter Unit stops in the middle of cutting. |
Move the Carriage to the left, remove the paper, and return the Carriage to the right. If the roll cannot be cut using the Cutter Unit , cut the roll manually. |
The Cutter Unit is not installed. |
Install the Cutter Unit . |
In other cases, the Cutter Unit may be damaged. |
Contact your Canon dealer for assistance. |