Article ID: ART118174 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
Remove packing material so that the print head holder can move.
Solution
Remove Packing Material
Remove packing material so that the print head holder can move.
- Confirm that the printer is powered off.
- Lift up the scanning unit (printer cover) then place the scanning unit support into position. After the support (<1>) is fixed into position, release your hands from the scanning unit.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP470/LidOpened.jpg)
*MP470 shown
Caution: If the front cover is opened with the printer powered on, the print head holder may not operate properly, resulting in injury or printer problems.
- Remove the orange protective tape and the protective material.
![](/library/attachments/ServiceWareImages/LDImages/WSSS/05SJ00080_EN_00/05SJ00080_01.jpg)
- Close the scanning unit (printer cover).
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP450/MP450_close_scanner_lid.jpg)
*MP450 shown in above diagram
- Press the <ON/OFF> button to power the printer back on.