Redistribute the toner inside the cartridge

Redistribute the toner inside the cartridge. If the problem persists, replace the cartridge.

When the machine runs out of toner, the following screen appears on the touch panel display.

When this happens, remove the cartridge from the machine and slowly shake it sideways to redistribute toner.

Reinstall the cartridge in the machine and print out a test page.

If the error message still appears, follow the instructions shown on the screen and replace the cartridge.

If you press [Recover Later], you can continue operations, such as setting modes and scanning originals, without replacing the cartridge immediately.

warning:

- Do not burn or throw used cartridges into open flames, as this may cause the toner remaining inside the cartridges to ignite, resulting in burns or a fire.

- Do not store cartridges in places exposed to open flames, as this may cause the toner to ignite, resulting in burns or a fire.

- When discarding used cartridges, put the cartridges in a bag to prevent the toner remaining inside the cartridges from scattering, and dispose of them in a location away from open flames.

attention:

- Do not touch the rollers and parts which have labels ?CAUTION! Hot surface avoid contact? on. They become very hot during use.

- Keep toner out of the reach of small children. If toner is ingested, consult a physician immediately.

- Take care not to allow toner to come into contact with your hands or clothing. If toner gets onto your hands or clothing, wash it off immediately with cold water. Washing it off with warm water will set the toner, and make it impossible to remove the toner stains.

note:

- When you are replacing a cartridge, be sure to use a cartridge designed for this product.

- Do not replace cartridge until the message prompting you to do so appears.

- Do not attempt to replace the cartridge while the machine is printing.

- Complete instructions on how to replace the cartridge can be accessed by pressing [Previous] or [Next] on the touch panel display.

- If the toner runs out during a print job, the machine will start printing the remaining pages automatically after you replace the cartridge.

1. Press the button on the left cover of the main unit, and open the left cover.

2. Open the front cover.

3. Rotate the unlock lever until it clicks.

note:

Make sure that the (down arrow) on the lever is aligned with the (up arrow) of the (Unlock) icon position before proceeding.

4. While grasping the handle of the cartridge holder, pull the cartridge holder out of the machine until it stops.

5. While grasping the handle of the cartridge, remove the cartridge from the cartridge holder.

Lift the cartridge straight up.

6. Hold the cartridge, shake it gently five or six times from side to side, then back and forth to evenly distribute the toner inside.

7. While grasping the handle of the cartridge, insert the cartridge into the cartridge holder.

note:

Use only the cartridge recommended for use in this machine.

8. While grasping the handle of the cartridge holder, push the cartridge holder in the machine as far as it will go.

16. Rotate the lever to the locked position.

note:

Make sure that the (down arrow) on the lever is aligned with the (right arrow) of the (Lock) icon position.

17. Close the front cover.

attention:

Be careful not to get your fingers caught.

18. Gently close the left cover of the main unit until it clicks by placing your hand on the hand symbol located on the left cover.

attention:

Be careful not to get your fingers caught.