Manually setting the IP address using IPv6
1. Press (Additional Functions).
Press 
(Additional Functions).
2. Press [System Settings]
[Network Settings]
[TCP/IP Settings]
[IPv6 Settings].
If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using 
- 
(numeric keys), then press 
(Log In/Out) to enter the System Settings menu. The IPv6 Settings screen appears.
3. Press [Use IPv6].
4. Select [On] for <Use IPv6>, then press [OK].
- [On]: Enables the use of IPv6.
- [Off]: Disables the use of IPv6.
note:
If you press [On] for <Use IPv6>, a link local address is automatically set.
5. Press [Stateless Address Settings].
6. Select [On] or [Off] for <Use Stateless Address>, then press [OK].
- [On]: Sets a stateless address automatically when the machine is started.
- [Off]: Does not set a stateless address automatically.
note:
The stateless address is discarded when the machine is restarted (with the machine's main power switch on).
7. Press [Manual Address Settings].
8. Select [On] or [Off].
- [On]: Enables you to set the IPv6 address manually. Proceed to step 9.
- [Off ]: Disables you to set the IPv6 address manually. Skip to step 16.
9. Press [Settings].
10. Press [Manual Address].
11. Enter the IPv6 address value using the keys on the touch panel display, then press [OK].
12. Enter the IPv6 address prefix length in <Prefix Length> using [-], [+], or (numeric keys).
Enter the IPv6 address prefix length in <Prefix Length> using [-], [+], or 
- 
(numeric keys).
13. Press [Default Router Addr.].
14. Enter the default router address value using the keys on the touch panel display, then press [OK].
15. Confirm the settings you specified, then press [OK].
16. Press [OK].
17. Press [Use DHCPv6].
18. Select [On] or [Off] for <Use DHCPv6>, then press [OK].
- [On]: Uses DHCPv6 to obtain a stateful address from a DHCP server.
- [Off ]: Does not obtain a stateful address from a DHCP server.
note:
If you press [On] for <Use DHCPv6>, a stateful address is automatically set.
19. Press [Done] repeatedly until the Additional Functions screen closes.
20. Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.
