Sending a Job to a File Server Using the Browse Key (Windows (SMB)) (imageCLASS MF7480)

1. Press (SEND).

Press (SEND).

2. Place your originals.

3. Make sure the machine is ready to send.

4. Press [New Address].

5. Press [File].

6. Press the Protocol drop-down list, then select [Windows (SMB)].

7. Press [Browse].

note:

After turning the main power on, you must wait for the time set in Startup Time Settings to elapse before pressing [Browse]. Network transmission is not possible until this startup time has elapsed.

8. Select the desired workgroup, then press [Down].

To move up one level, press [Up].

note:

If the desired workgroup is not displayed, press [] or [] to scroll to the desired workgroup.

9. Select the desired file server, then press [Down].

To move up one level, press [Up].

note:

If the desired file server is not displayed, press [] or [] to scroll to the desired file server.

If the Enter Network Password screen is displayed:

- Press [User Name].

- Enter your user name (up to 24 characters), then press [OK].

- Press [Password].

- Enter your network password (up to 14 characters), then press [OK].

- Press [OK].

10. Press [Down].

11. Select the folder on the specified server to which you want to send your documents, then press [OK].

To move down one level, press [Down].

To move up one level, press [Up].

note:

If the desired folder is not displayed, press [] or [] to scroll to the desired folder.

12. Press [OK].