Using the Self-timer
With this function, images are shot 10 or 2 seconds after the shutter button is pressed. This is useful when you want to take a memorable photo with everyone including yourself in the picture. The self-timer can be used in any shooting mode. In addition, you can set the delay time and number of shots (Custom Timer).
- Press the button () and then use the or button () to display (10 seconds), (2 seconds), or (custom).
- When the shutter button is pressed fully, the self-timer will activate and the selftimer lamp will blink.
- When the self-timer is set to ( ), the shutter activates 10 (2) seconds after the shutter button is pressed fully.
- With the (Custom Timer) option, the specified number of shots are taken after the specified delay when the shutter button is pressed fully. You can change the delay time (0-10, 15, 20, 30sec.) and number of shots (1-10). When [Delay] is set to 2 or more sec., the self-timer sound begins to beep 2 sec. before the shutter releases. When [Shots] is set to more than 1, the self-timer sound only beeps before the first shot.
To Cancel the Self-Timer
Press the button to display .
The self-timer cannot be used on some shooting modes. |
Changing the delay time and number of shots (Custom Timer).
- In the [ (Rec)] menu, select (Self timer) and press the FUNC./SET button.
-
Setting the delay time and number of shots.
- Use the or button to select [Delay] or [Shots].
- Use the or button to change the delay time (0-10, 15, 20, or 30 sec.) or number of shots (1-10).
- To finalize your selection, press the <FUNC./SET> button.
- To complete the setting press the <MENU> button.
- The display will return to the shooting screen.
- If the number of shots is set to 2 or more, the exposure and white balance settings are locked after the first shot. Shooting will cease if the SD card becomes full.
-
Between shots the self-timer lamp will flash and the self-timer sound will play as follows. If multiple shots are selected, the self-timer sound will play for the first shot only:
- 0 seconds: no self-timer sound
- 1 second: no self-timer sound, but the camera beeps
- 2-10 seconds: self-timer sound starts to play 2 seconds before the shutter releases
- The self-timer sound can be changed with the Selftimer Sound item in the (My Camera) menu.
- The option cannot be set in the Stitch Assist or movie mode or in a My Colors mode.
- The following may occur when the Shots category is set to 2 or more.
- if the memory is full, the interval between shots may lengthen. - if the flash is firing, the interval between shots may lengthen to allow the flash to recharge.
|