Procedure for setting Date Stamp Mode PowerShot SD890 IS.
Article ID: ART102827
|
Date published: 05/11/2015
|
Date last updated: 08/15/2015
Description
Procedure for setting Date Stamp Mode PowerShot SD890 IS.
Solution
Postcard Print Mode
You can shoot images with settings appropriate for postcard size printing.
* When printing standard image data to postcard size, sometimes the top, bottom and sides may not get printed. By shooting images in the Postcard Print mode, you can check the printing area (vertical / horizontal ratio of 3:2) beforehand. In addition, the resolution locks to M1 (1600 x 1200) and the compression locks to the (Fine) setting, rendering smaller file sizes.
Press the <FUNC.> button.
Select L* using or .
Select (Postcard) using or . * The current setting is displayed.
You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.
Press the <FUNC./SET> button.
Shoot the image.
When you press the shutter button halfway, the area that will not get printed grays out.
Shooting procedures are the same as for the mode.
Press the <DISP.> button to switch to [Date & Time] with the or buttons.
Ensure that the Date/time is set before using the Date Stamp feature.
The Date Stamp cannot be deleted from the image once it has been set since it is embedded in the image and is a part of the image.