Turning the Power On/Off

Turning on the camera without the start-up sound and image
Powering the Camera in Shooting Mode
Powering the Camera in Playback Mode
Turning the Power Off
Power Saving Function

Powering the Camera in Shooting Mode

1. Press the ON/OFF button.
   
   
2. Choose your shooting mode using the command dial.
   
   

You will hear a start-up sound and see the start-up image when the power comes on. The start-up image does not appear when the LCD monitor is off in shooting mode or the A/V OUT terminal is connected to a TV. Be careful not to touch the lens when shooting. Please also refrain from forcing the lens with fingers or other objects. It could lead to malfunctions or damage the camera. If this occurs, turn the camera off and back on.

Turning on the camera without the start-up sound and image

Press and hold the button, then turn on the power. This will prevent the camera from displating the startup image or startup sound.

Powering the Camera in Playback Mode

• Press the (Playback) button on the rear of the camera.
  
  
  

* For printer connection mode information, see the Direct Print User Guide. For computer connection mode information, see the Software Starter Guide.

Turning the Power Off

Press the ON/OFF () button on the top of the camera. The power will then turn off regardless if you are in the Playback or Shooting mode.

Be careful not to touch the lens when shooting. Please also refrain from forcing the lens with fingers or other objects. It could lead to malfunctions or damage the camera. If this occurs, turn the camera off and back on.

Power Saving Function

This camera is equipped with a power saving function. When this function is turned on and it activates, restore power by turning the mode lever toward or .

Shooting Mode: Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor also shuts off approximately 1 minute* after the last control is accessed on the camera. Press any button except the mode lever to turn the LCD monitor back on.
* This time can be changed

Playback Mode: Powers down approximately 5 minutes after the last control is accessed on the camera.

Printer Connection Mode: Powers down approximately 5 minutes after the last control is accessed on the camera.

• Please note that the camera continues to consume a minimal amount of power even when the power saving function shuts it down.
• The power saving function is disabled while a slide show plays on the camera or during a computer connection.
• You can turn off the power saving function in the Set up menu.