Setting the Receive Mode. MF4300 series

1. Press [Menu].

2. Press or to select <5 FAX SETTINGS>, then press [OK].

3. Press or to select <RX MODE>, then press [OK].

4. Press or to select the receive mode, then press [OK].

Receive mode options:

• <FaxOnly> - default
• <AnsMode>
• <FAX/TEL>
• <MANUAL>
• <DRPD>

- If you select <FAX/TEL> you may make optional settings

1. Press [ ] or [ ] to select <RING START TIME>, then press [OK].

2. Press [ ] or [ ] to specify the duration (4 to 30 seconds) for which the machine attempts to detect the fax tone before it starts ringing, then press [OK].

• If the machine receives a fax, the machine does not ring and switches to the receive mode automatically.
• The default setting is <6SEC>.

3. Press [ ] or [ ] to select <F/T RING TIME>, then press [OK].

4. Press [ ] or [ ] to specify the duration (10 to 45 seconds) of ringing, then press [OK].

• The default setting is <22SEC>.

5. Press [ ] or [ ] to select <F/T SWITCH ACTION>, then press [OK].

6. Press [ ] or [ ] to select the action the machine will take after the ringing ends, then press [OK].

• <RECEIVE>: Receives a fax.

• <DISCONNECT>: Disconnects the call.

- If you select <DRPD> you must select the correct ring pattern from the options below or it will not function.

• <Normal Ring> - default
• <Double Ring>
• <Short-Short-Long>
• <Short-Long-Short>
• <Other Ring Type>

5. Press [STOP/RESET] to return to the standby mode.