You can check the following printer information and status at the top page:
Printer Information
You can check the printer information.
[Printer Name]
Displays the model name of the connected printer.
[Firmware Version]
Displays the version of the connected printer firmware.
[Network Printer Name]
Displays the name of the network printer.
[Bonjour Service Name]
Displays the service name for Bonjour.
Status
Allows you to check the configuration information for the network connection and the communication status.
[LAN Connection Type]
Displays the effective network connection type, either wired LAN or wireless LAN.
[MAC Address]
Displays the MAC Address that was set to the printer on the wireless LAN.
[IP Address]
Displays the IP Address of the printer on the wireless LAN.
[Subnet Mask]
Displays the Subnet Mask of the printer on the wireless LAN.
[Default Gateway]
Displays the Default Gateway of the printer on the wireless LAN.
[Network Type]
Displays the Network Type of the printer on the wireless LAN.
[SSID]
Displays the SSID that was set to the printer on the wireless LAN.
[Encryption Method]
Displays the Encryption Method of the printer on the wireless LAN.
[Signal Strength]
Indicates the strength of the signal that the printer is receiving from the access point when a wireless LAN is used. The strength is indicated with a value from 0% to 100%.
[Link Quality]
Indicates the quality of the signal without the noise received through a wireless LAN. The quality is indicated with a value from 0% to 100%.
If the value is low, move the printer closer to the access point or remove any obstacles between the printer and the access point.
[Transmission Rate]
Displays the Transmission Rate between the printer on the wireless LAN and the access point. The unit is megabits per second (Mbps).
back