Erasing Single Images
1. In the camera's playback mode, select the image you wish to erase using the or buttons and press the button. A confirmation screen appears.
2. Confirm that [Erase] is selected and press the <FUNC./SET> button to confirm erasure of the image.
- To cancel instead of erasing, select [Cancel] and press the <FUNC./SET> button.
Protected images cannot be erased with the erase function. Please also note that erased images cannot be recovered using the camera. Excercise adequate caution before erasing an image.
|
Erasing All Images / Using a Filter to Erase Images
The following table shows the different ways you can choose to erase an image.
Select |
Erase images after selecting them one at a time. |
Select Range |
For picking a first and last image and erasing all the images in the range. |
All Images |
Erases all images on a memory card. |
1. In the [(Replay)] menu select [Erase] and press the <FUNC./SET> button.
2. Select the desired menu item and press the <FUNC./SET> button.
[Select]
- Select the image.
Use the or button to select the image you wish to erase and press the <FUNC./SET> button.
- Pressing the <FUNC./SET> button again cancels the setting.
- Press the <MENU> button to complete the setting.
- Erase the image.
Use the or button to select [OK].
Press the <FUNC.SET> button.
- Selecting [Stop] cancels the selection of the image you are about to erase and returns to Step 2.
[Select Range]
- Select the first image.
- You can circle your finger on the Touch Control Dial to select the first and last image.
1. Press the <FUNC./SET> button.
2. Use the or button to select the first image for the range to erase.
3. Press the <FUNC.SET> button.
Select the last image.
1. Use the button to select [Last Image].
2. Press the <FUNC./SET> button.
3. Use the or button to select the last image in the range.
4. Press the <FUNC./SET> button.
- An image with a lower number than the first image cannot be selected as the last image.
- Up to 500 images can be selected.
Erase the Images.
1. Press the and choose [Erase]
2. Press the <FUNC./SET> button.
All Images
- Erase the images.
1. Use the or button to select [OK].
2. Press the <FUNC./SET> button.
- Selecting [Cancel] cancels the selection of the image you are about to erase and returns to step 2.
- Pressing the <FUNC./SET> button while erasing is in progress cancels the procedure.
- Please note that formatting (initializing) a SD card erases all data, including protected images and other file types. Please check the contents of a SD card before formatting it.
|