Inserting the Memory Card

Before Inserting the Memory Card

The following types of memory cards and image data are compatible with the machine.

Important If you took and saved photos on a type of memory card that is not guaranteed operation to be used on your digital camera, the image data may be unreadable on the machine or damaged. For information on memory cards that your digital camera guarantees operation, refer to the instruction manual supplied with your digital camera. Format the memory card with a digital camera compliant with the Design rule for Camera File system (Exif 2.2/2.21 compliant), TIFF (Exif 2.2/2.21 compliant). The memory card may not be usable with the machine if it is formatted on a computer.

Memory Cards that Do Not Require a Card Adapter

	SD Secure Digital memory card SDHC memory card MultiMediaCard MultiMediaCard Plus
	Compact Flash (CF) Card Supports Type I/II (3.3 V) Microdrive
	Memory Stick Memory Stick PRO Memory Stick Duo Memory Stick PRO Duo

Memory Cards that Require a Card Adapter

Important Be sure to attach the special card adapters to the following memory cards before inserting to the Card Slot. If one of the following memory cards is inserted without the card adapter, you may not be able to remove the memory card. In this case, refer to "Troubleshooting" in the on-screen manual: Advanced Guide.

	miniSD Card *1 miniSDHC Card *1
	microSD Card *1 microSDHC Card *1
	xD-Picture Card *2 xD-Picture Card Type M *2 xD-Picture Card Type H *2
	RS-MMC *3
	Memory Stick Micro *4

^*1 Use the special "SD Card Adapter".

^*2 Requires purchase of a separate compact flash card adapter for xD-Picture Card.

^*3 Use the special card adapter.

^*4 Use the special Duo size adapter or full size adapter.

Printable Image Data

This machine accepts images taken with a camera compliant with the Design rule for Camera File system (Exif 2.2/2.21 compliant), TIFF (Exif 2.2/2.21 compliant). Other image or movie types such as RAW images cannot be printed.

Inserting the Memory Card

Caution When a memory card is inserted into the Card Slot, the Access lamp is lit. When the Access lamp is flashing, the machine is accessing the memory card. In this case, do not touch the area around the Card Slot.

Note When Writable from USB PC or Writable from LAN PC is selected in Read/write attribute of Advanced settings under Device settings in the Settings menu, you cannot print image data on the memory card or save scanned data on the memory card using the Operation Panel on the machine. After using the Card Slot as the memory card drive of a computer, remove the memory card and be sure to set Read/write attribute to Not writable from PC. When you use a computer to edit or enhance photos saved on a memory card, be sure to print them from the computer. If you use the Operation Panel, the photos may not be printed properly.

1. Prepare your memory card.

Attach a special card adapter if your memory card requires one.

See Memory Cards that Require a Card Adapter.

1. Turn on the power, and open the Card Slot Cover.

1. Insert only one memory card into the Card Slot.

The location to insert a memory card varies depending on each type of memory card. Insert your memory card straightforward WITH THE LABELED SIDE FACING TO THE LEFT into the Card Slot, according to the insert location in the figure below.

When the memory card is inserted properly, the Access lamp (A) will light up.

Be sure to attach the card adapter to the memory card with the mark * (asterisk) below, and then insert it into the Card Slot.

For Memory Stick Duo, Memory Stick PRO Duo, or Memory Stick Micro with the Duo size adapter)*:

For SD Secure Digital memory card, SDHC memory card, miniSD Card*, miniSDHC Card*, microSD Card*, microSDHC Card*, Memory Stick, Memory Stick PRO, MultiMediaCard , MultiMediaCard Plus , or RS-MMC *:

For Compact Flash (CF) Card, Microdrive, xD-Picture Card*, xD-Picture Card Type M*, or xD-Picture Card Type H*:

1. Close the Card Slot Cover.

Removing the Memory Card

Important If you used the Card Slot as the memory card drive of a computer, you must perform the "safe removal" operation on your computer before physically removing the memory card from the machine. - In Windows, if you are connecting the machine using the USB cable, right-click the removable disk icon and click Eject. If Eject does not appear on the screen, make sure that the Access lamp is lit, and then remove the memory card. - If you used the Card Slot via the wired LAN, you do not need the "safe removal" operation on your computer. - In Macintosh, drag (Mount drive) into the Trash.

1. Open the Card Slot Cover.

1. Make sure that the Access lamp is lit, and remove the memory card.

Hold the part of the memory card that is sticking out and remove it from the machine straightforward.

1. Close the Card Slot Cover.