Changing the <CONT. PRINTING> setting on the machine.
If <TONER LOW/PREPARE NEW TONER> appears while receiving a fax, you can set if the machine stores all documents in memory or continue printing without storing documents in memory by following the procedure below.
You can set if the machine stores all documents in memory or continue printing without storing documents in memory, when the toner runs out. The default setting is <RX TO MEMORY>.
Note:
- If <CONT. PRINTING> is set to <KEEP PRINTING>, you can still continue printing even after the <TONER LOW/PREPARE NEW TONER> message appears. The printed documents may be light or blurred because of lack of toner. The data is erased when the documents are printed out, so you cannot print the same documents again.
- If <CONT. PRINTING> is set to <RX TO MEMORY>, the machine stores all documents in memory when the <TONER LOW/PREPARE NEW TONER> message appears. After the toner cartridge is replaced, the documents can be printed and the setting can be reset.
1. Press 
[Menu].
2. Press 
or 
to select <TX/RX SETTINGS>, then press [OK].
3. Press or to select <TX/RX COMMON SET.>, then press [OK].
4. Press or to select <RX SETTINGS>, then press [OK].
5. Press or to select <CONT. PRINTING>, then press [OK].
6. Press or to select <RX TO MEMORY> or <KEEP PRINTING>, then press [OK].
- <RX TO MEMORY>: The machine stores all documents in memory.
- <KEEP PRINTING>: You can continue printing.
7. Press 
[Stop/Reset] to return to the standby mode.
