Connect the camera to the printer and print directly from the camera.
Attention:
- In this section, [PowerShot SD940 IS / DIGITAL IXUS 120 IS] is used as an example to explain the operations. Depending on your model, the position of buttons, screen indications, and setting items may vary.
- These instructions show how to print one image on one sheet of paper as an example.
|
1. Connect the camera to the printer.
Connect the [interface cable] to the camera's [DIGITAL terminal].
Connect the other end of the cable to printer's USB terminal.
2. Turn the printer's power on.
3. Press the <Playback> (
) button to turn on the camera.
4. Operate the <directional buttons> left or right to display an image to print on the LCD monitor.
Press the <FUNC./SET> (
) button.
5. The following screen appears.
Make sure that the [Print] (
) is selected, and then press the camera's <FUNC./SET> () button.
6. The screen for specifying the print settings appears.
Operate the <directional buttons> left or right to select [Date] for adding the date.
Operate the <directional buttons> left or right to specify the number of prints.
Select 
[Paper Settings], and then press the camera's <FUNC./SET> () button.
7. The screen for setting the paper size appears.
Operate the <directional buttons> up or down to select the paper size, then press the camera's <FUNC./SET> () button. In the image shown above, the [9 x 13 cm] size is selected.
8. The screen for setting the paper type appears.
Operate the <directional buttons> up or down to select the paper type, and then press the camera's <FUNC./SET> () button. In the image shown above, [Photo] is selected.
9. The layout (border) settings screen appears.
Operate the <directional buttons> up or down to select the layout type, and then press the camera's <FUNC./SET> () button. In the image shown above, [Bordered] is selected.
10. Return to the print setting screen.
Make sure that the settings are correct.
Select [Print] and press the camera's <FUNC./SET> () button to start printing.
