LED Display and Basic Operations
You can use the machine to make copies or perform maintenance operations without a computer.
This section describes the LED display and basic operations on the Operation Panel.
The number 1 appears on the LED normally when turning on the power.
![figure:LED](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP495/t_10070ce_mp49530.jpg)
The LED display indicates the machine status as follows.
Machine Status | LED Display |
---|
While copying | Number of copies (flashing) |
While printing, scanning, or performing maintenance operations | ![figure:LED](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP495/t_10080ce_mp495.jpg)
(flashing in order) |
When an error occurs | E and number appear alternately.
P and number appear alternately.
An error that requires contacting the service center may have occurred. |
While the Scanning Unit (Cover) is open | ![figure:LED](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP495/t_10090ce_mp4952.jpg)
(flashing) |
Number of Copies
When copying starts, the specified number of copies appears on the LED. While copying is in progress, the number on the LED flashes and decreases by one to indicate the remaining number of copies to be made.
![figure:LED](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP495/t_10100ce_mp49531.jpg)
Each time you press the [+] button, the number on the LED increases by one. When F appears, the number of copies is set to "20". Press the [+] button again to return to "1".
![figure:LED](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP495/t_10110ce_mp49532.jpg)
Maintenance Codes
To perform maintenance of the machine, press the
(Maintenance) button repeatedly until the desired code appears on the LED, and then press the Black or Color button.
Maintenance Code | Operation |
---|
| Prints the nozzle check pattern. |
| Cleans the Print Head. |
| Cleans the Print Head deeply. |
| Prints the print head alignment sheet. |
| Scans the print head alignment sheet to align the Print Head automatically. |
| Prints the current head position adjustment values. |
| Cleans the Paper Feed Roller. |
| Cleans the inside of the machine. |
| Switches the size of paper loaded in the Rear Tray between A4 and 8.5" x 11" (Letter). (This setting is used for making copies.) |
| Sets the machine to prevent paper abrasion. |
| Prints the wireless LAN setup information. |
| Configures the wireless LAN using the WPS (Wi-Fi Protected Setup) PIN code method. |
| Enables or disables the wireless LAN connection. |
| Resets wireless LAN settings to the defaults. |
Error Codes
When an error occurs, E and number appear alternately on the LED to indicate the error code.
e.g. "E, 1, 6"
![figure:LED](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP495/t_10260ce_mp49534.jpg)
(flashing in order)
Note For details on the error codes, refer to "Troubleshooting" in the on-screen manual: Advanced Guide.
If an error code with P appears, an error that requires contacting the service center may have occurred.
For details, refer to "Troubleshooting" in the on-screen manual: Advanced Guide. |