Making Copies
This section describes the procedure to copy with Standard copy.
-
Make sure that the machine is turned on.
-
Select Copy on the HOME screen.
The Copy standby screen is displayed.
- Load paper.
- Load the original on the Platen Glass. More..
-
Specify the settings as necessary.
-
Copies (Number of copies)
Specify by using the + or - button.
-
Magnif. (Magnification)
Specify from 25% to 400% by using the button. When touching and holding the button, the magnification increase or decrease by 10%.
Note
-
Intensity
Specify by using the button.
-
Print settings
By touching the right Function button, the print settings screen is displayed.
On the print settings screen, you can change the settings of page size, media type, and print quality and so on.
-
Preview
By touching the center Function button, you can preview an image of the printout on the preview screen.
-
Copy menu
By touching the left Function button, the Copy menu screen is displayed.
You can select a copy menu to specify various layouts.
Note
- To reset the settings of magnification, intensity, and number of copies, touch the Stop button.
-
Touch the Color button for color copying, or the Black button for black & white copying.
The machine starts copying.
Remove the original on the Platen Glass after copying is complete.
Important
- Do not open the Document Cover or remove the original from the Platen Glass until copying is complete.
Note
- To cancel copying, touch the Stop button.
Page top
To load the original on the Platen Glass, align it with the alignment mark () WITH THE SIDE TO COPY FACING DOWN as shown below.
Then close the Document Cover gently.
Note
Characters and lines written with a light colored pen or highlight pen may not be copied properly.
Back