You can connect the machine to a network to share it among multiple computers.

• Multiple users cannot scan at the same time.

• Complete the network settings of the machine beforehand using the Setup CD-ROM.

Complete the following settings to enable scanning over a network.

Specifying the Machine

Use IJ Network Scanner Selector EX to specify the scanner you want to use. By specifying the scanner, you can scan over a network using your computer.

• If the product you want to use is changed with IJ Network Scanner Selector EX, the product used for scanning with MP Navigator EX changes as well.

  If the machine is not selected in MP Navigator EX, check that it is selected with IJ Network Scanner Selector EX.

  IJ Network Scanner Selector EX Menu and Setting Screen

• The following setting is not required if the machine has already been specified during setup.

1. From the Go menu of Finder, select Applications, then double-click the Canon Utilities folder, IJ Network Scanner Selector EX folder, then Canon IJ Network Scanner Selector EX icon.

   Canon IJ Network Scanner Selector EX appears in the menu bar, and the Scan-from-PC Settings screen appears.

2. Select the machine from Scanners.

   Select the Bonjour service name set to the machine. When Bonjour is disabled, the MAC address of the machine is displayed.

   
   
   Important

   • If multiple scanners exist on the network, multiple model names are displayed. In that case, you can select one scanner per model. For details, refer to the help file of IJ Network Scanner Selector EX.

3. Click OK.

Setting for Scanning with MP Navigator EX

To scan over a network using MP Navigator EX, specify the machine with IJ Network Scanner Selector EX, then follow the steps below and change the connection status between the computer and the machine.

1. Start MP Navigator EX.

   Starting MP Navigator EX

2. Click Preferences.

3. Click the General tab and select "XXX series Network" (where "XXX" is the model name) for Product Name.

   
   
   Note

   • When you click Change..., the Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.

     If you have multiple scanners, you can select other scanners.

   • For USB connection, select "XXX series" (where "XXX" is the model name) for Product Name.

4. Click OK.

   The Preferences dialog closes. You can now scan via a network connection.

   Go to the Main Menu to check whether network scanning is enabled.

   

• If the Bonjour service name or MAC address of the machine is displayed in gray or not displayed, or cannot be selected, check the following conditions and click OK to close the screen, then reopen it and select the machine.

  - ScanGear (scanner driver) is installed

  - Network settings of the machine is completed after installing ScanGear

  - Network communication between the machine and computer is enabled