How to use Touch & Drag AF Settings on the EOS M50 Mark II.
Article ID: ART178444 |
| |
Date published: 11/19/2020 |
| |
Date last updated: 12/01/2020 |
Description
Canon : Product Manual : EOS M50 Mark II : Touch & Drag AF Settings
Solution
Touch & Drag AF Settings
You can move the AF point or Zone AF frame by tapping or dragging on the screen as you look through the viewfinder.
Touch & Drag AF
-
Select [: Touch & drag AF settings].
-
Select [Touch & drag AF].
Tapping to Select Subjects for
To switch the subject tracked to a different person when several faces are detected with the AF method set to , you can tap the area set in [Active touch area].
Note that this setting is not available with [Touch & drag AF] set to [Enable].
-
Select [Tap to select subject for ].
-
Select [On].
Note
- To switch to a person on the left, tap the left side of the area set in [Active touch area], and to switch to a person on the right, tap the right side.
- With [Eye detection] set to [Enable], the camera switches to the eyes of a different subject.
Positioning Method
You can set how positions are specified by tapping or dragging.
-
Set [Positioning method].
-
Absolute
The AF point moves to the tapped or dragged position on the screen.
-
Relative
The AF point moves in the direction you drag, as much as you drag, no matter where you touch the screen.
Active Touch Area
You can specify the area of the screen used for tap and drag operations.
-
Select [Active touch area].
-
Set the area that will respond to touch.
|
SIMS Doc Id
1605640552727677932