Cancel the job and set the paper size correctly in Paper Settings
Cancel the job and follow the instructions below, to change the paper size in <Paper Settings> menu.
For the Paper Drawer
1. Press [
] (Select Paper/Settings).
2. Select <Paper Settings> using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108008.gif)
3. Select < Drawer 1> or < Drawer 2> using [
] or [
] and press [OK].
- < Drawer 2> is displayed only when the optional paper drawer (Drawer 2) is installed.
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108009.gif)
4. Select a paper size using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108010.gif)
5. Select the paper type using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108012.gif)
6. Press [
] (Select Paper/Settings) to close the <Select Paper> screen.
Registering the Default Paper Settings for the Multi-purpose Tray
If you want to always load the same paper in the multi-purpose tray, register the default paper using the following procedure.
note:
If the default paper is registered
- The setting screen is not displayed when paper is loaded.
1. Press [
] (Select Paper/Settings).
2. Select <Paper Settings> using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108855.gif)
3. Select <Multi-Purpose Tray> using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108856.gif)
4. Select <On> using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108857.gif)
5. Select <Paper Settings> using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108858.gif)
6. Select <Multi-Purpose Tray> using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108859.gif)
7. Select <Set Details> using [
] or [
] and press[OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108860.gif)
8. Select a paper size using [
] or [
] and press [OK].
* To register a custom paper, see Setting a Custom Paper Size.
* The registered custom paper is listed at the top. Select it with [
].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108861.gif)
If you select <Custom Size>
Specifies the size of <X: "> direction and <Y: "> direction of the custom paper.
(1) Select the direction using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108862.gif)
(2) Specify the size using [
] or [
] and press [OK].
You can also enter values using the numeric keys.
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108863.gif)
(3) Select <Apply> using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108864.gif)
9. Select the paper type using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108866.gif)
10. Press [
] (Select Paper/Settings) to close the <Select Paper> screen.
Setting a Custom Paper Size
You can register sizes and types of frequently used paper.
- When <Register Default Set.> is <Off> (default)
The screen to be displayed when paper is loaded in the multi-purpose tray
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108013.gif)
- When <Register Default Set.> is <Off>
Paper Size Setting Screen
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108014.gif)
1. Press [
] (Select Paper/Settings).
2. Select <Paper Settings> using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108015.gif)
3. Select <Register Custom Paper> using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108016.gif)
4. Select <Not Registered> using [
] or [
] and press [OK].
When selecting the registered custom paper, you can edit and delete the custom paper.
5. Specifies the size of <X: "> direction and <Y: "> direction.
(1) Select the direction using [
] or [
] and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108018.gif)
(2) Specify the size using [
] or [
] and press [OK].
You can also enter values using the numeric keys.
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108019.gif)
(3) Select <Apply> using [
] or [
and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108020.gif)
6. Select the paper type using [
] or [
and press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0108021.gif)
7. Press [
] (Select Paper/Settings) to close the <Select Paper> screen.