Ask a Question

How to print out the LAN settings - MX882

Article ID: ART136339 | Date published: 05/13/2015 | Date last updated: 07/07/2016
 

Description

This article explains how to print a Network Configuration Page for the PIXMA MX882.  An example of this page is attached to this article.

Solution

Check the LAN Settings
 

  1. Make sure that the machine is turned on. Load a sheet of A4 or Letter-sized plain paper.
     

  2. Press the Setup button.
     

  3. Select Device settings, then press the OK button.

     
  4. Use the UPDOWN button to select LAN settings, then press the OK button.

     
  5. Use the UPDOWN button to select Confirm LAN settings, then press the OK button.

     
  6. Use the UPDOWN button to select Print LAN details, then press the OK button to confirm the selection.
     

  7. Use the UPDOWN button to select Yes, then press the OK button to start printing.

    The machine starts printing the network setting information.

Attachment

MX882_NW_Info.pdf
35K • < 1 minute @ 56k, < 1 minute @ broadband



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments