Confirming usable envelopes
This printer can use the following envelopes.

Using the following types of envelopes may result in paper jams that are difficult to clear or may result in damage to the printer. Envelopes with fasteners or snaps Envelopes with address windows Envelopes with adhesive on the surface Wrinkled or creased envelopes Poorly manufactured envelopes in which the glued parts are uneven Irregularly-shaped envelopes

	1.	Place the stack of envelopes on a flat surface, and then flatten them to release any remaining air. Then, press the edges tightly.		2.	Loosen any stiff corners of the envelopes and flatten curls as shown in the figure.		3.	Align the edges of the envelopes on a flat surface.

1. Open the multi-purpose tray, and then pull out the auxiliary tray.

When loading long-size paper Open the tray extension also.

2. Slide the paper guides a little wider than the actual paper width.

3. Gently load paper with the printing side face-up until it touches the back of the tray.
 

4. Align the paper guides to the width of the paper.

IMPORTANT

Be sure to align the paper guides to the width of the paper. If the paper guides are too loose or too tight, this may result in paper being misfed or paper jams.

5. Be sure that the paper stack is loaded under the load limit guides (A).