With your camera, you can edit out the first and last scenes of a movie in 1-sec. increments. You can select [Overwrite] to save and overwrite the original movie, or [New file] to save the movie as a new movie. This operation is carried on the movie playback screen. 1. Set the power switch to <ON>. 2. Press the <  > to display the image.
 3. Turn the <Quick Control Dial> to select the image. - With the single-image display, the [
 ] icon displayed on the upper left indicates a movie. - On the index display, the perforations on the left edge of the image indicates a movie. As movies cannot be played on the index display, press the <SET> button to switch to the single-image display.
 4. On the single-image display, press the <SET> button. The movie playback panel will appear on the bottom.
 5. Press the <Quick Control Dial> to select [  ], then press the <SET> button. The editing screen will be displayed.
 6. Specify the parts to be edited out. 6-1. Turn the <Quick Control Dial> to select either [  ] (Cut beginning) or [  ] (Cut end), then press the <SET> button. 6-2. Tilt the <Multi-controller> to the left or right to see the previous or next frames. Holding it down will fast forward the frames. Turn the <Quick Control Dial> for frame-byframe playback. - After deciding which part to edit out, press the <SET> button.
- The portion highlighted in blue on the top of the screen is what will remain.
 7. Check the editing. - Turn the <Quick Control Dial> to select [
 ], and then press the <SET> button to playback the portion highlighted in blue. - To change the editing, go back to step 6.
- To cancel the editing, select [
 ] and press the <SET> button.
 8. Turn the <Quick Control Dial> to select [  ], then press the <SET> button to save the movie. The save screen will appear. To save it as a new movie, select [New file]. Or to save it and overwrite the original movie file, select [Overwrite]. Then press the <SET> button.
 NOTE If the card does not have enough free space, [New file] will not be available.
| 
