If either a CF card or SD card is already inserted, you can start shooting. When only one card is inserted, the procedures described below are not necessary.

If you insert a CF card and SD card, you can select the recording method and select which card to use for recording and playing back images

Recording Method with Two Cards Inserted

	1 Select [Record func+card/folder sel.]. Under the [] tab, select [Record func+card/folder sel.], then press <>.
	2 Select [Record func.]. Turn the <> dial to select [Record func.], then press <>.
	3 Select the recording method. Turn the <> dial to select the recording method, then press <>.

Standard

Images will be recorded to the card selected with [Record/play].

Auto switch card

Same as with the [Standard] setting, but if the card becomes full, the camera will automatically switch to the other card to record images. When the camera switches to the other card, a new folder will be created automatically.

Rec. separately

You can set the image-recording quality for each card. Each image is recorded to the CF and SD cards at the image recording quality you have set. You can freely set the image recording quality to and , and , etc.

Rec. to multiple

Each image is recorded to the CF and SD cards simultaneously at the same image size. You can also select RAW+JPEG.

When [separately] is set, the maximum burst will decrease greatly

When [Rec. separately] or [to multiple] is set, the image will be recorded under the same file number to the CF and SD cards. Also, the LCD panel will display the number of possible shots of the card having the lower number. If one of the cards becomes full, [Card* full] will be displayed and shooting will be disabled. If this happens, either replace the card or set the recording method to [Standard] or [Auto switch card] and select the card with space remaining to continue shooting.