Using Non-EX-series Canon Speedlites

Article ID: ART137289 | Date published: 05/13/2015 | Date last updated: 11/04/2015
 

Description

Using Non-EX-series Canon Speedlites

Solution

Using Non-EX-series Canon Speedlites

  • With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to <M> (manual exposure) or <Av> (aperture-priority AE) and adjust the aperture setting before shooting.

  • When using a Speedlite that has manual flash mode, shoot in the manual flash mode.

 

Using Non-Canon Flash Units

Sync Speed

The camera can synchronize with non-Canon compact flash units at 1/200 sec. and slower speeds. With large studio flash units, since the flash duration is longer than compact flash units, set the sync speed within 1/60 sec. to 1/30 sec. Be sure to test the flash synchronization before shooting.

 

PC Terminal

  • The camera’s PC terminal can be used with flash units having a sync cord. The PC terminal is threaded to prevent inadvertent disconnection.

  • The camera’s PC terminal has no polarity. You can connect any sync cord regardless of its polarity.

Cautions for Live View shooting

If you use a non-Canon flash unit with Live View shooting, set [:Silent LV shoot.] to [Disable] (p.206). The flash will not fire if it is set to [Mode 1] or [Mode 2].

 

  • If the camera is used with a flash unit or flash accessory dedicated to another camera brand, the camera may not operate properly and malfunction may result.

  • Do not connect to the camera’s PC terminal any flash unit requiring 250 V or more.

  • Do not attach a high-voltage flash unit on the camera’s hot shoe. It may not fire. A flash unit attached to the camera’s hot shoe and a flash unit connected to the PC terminal can be used at the same time.

 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments