Ask a Question

How to Reset the Network Settings - MG5320

Article ID: ART169399 | Date published: 01/12/2018 | Date last updated: 01/12/2018
 

Description

Reset LAN Settings

Solution

To reset the network settings for the PIXMA MG5320 to the factory defaults, follow the steps below.
  1. From the HOME screen, press the up or down arrows until Setup appears.  Then, press the Function button under Setup.


     
  2. In the Setup menu, use the left or right arrows to highlight Device settings.  Press OK.


     
  3. In Device settings, press the down arrow until LAN settings is highlighted.  Press OK.


     
  4. In LAN settings, press the down arrow until Reset LAN settings is highlighted, then press OK.


     
  5. When you are prompted to reset the LAN settings, press the up arrow to highlight Yes.  Press OK.


     
  6. The printer will process for a few moments.



    When this process has completed, a message will appear.  Press OK.


You can also reset the LAN settings by selecting Reset setting in the Device settings menu shown in step 3.


  1. Press OK on Reset setting.
     
  2. In the Reset setting menu, press the down arrow to highlight LAN settings only.  Then, press OK.


     
  3. When prompted to reset the LAN settings, use the up arrow to highlight Yes.  Press OK.


     
  4. The printer will process for a few moments.



    When the LAN settings have been reset, press OK.


Press the HOME button on the printer to return to the HOME screen.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments