The time code will be output from the TIME CODE terminal as an SMPTE-standard LTC timing signal. The user bit will also be output. Before connecting the device, set [
ยคTC/UB Setup] > [Time Code] > [TC In/Out] to [Out] to change the TIME CODE terminal to output. If you set the [] > [SDI Output] setting to [HD] or [SD], the embedded time code will be output from the HD/SD SDI terminal.
NOTES
The user bit of the time code signal is output while the camcorder is recording in CAMERA mode or during playback of a clip in MEDIA mode. When [Other Functions] > [24.00P] is set to [On] or [w Other Functions] > [Frame Rate] is set to [23.98P] and the [00:00 TC/UB Setup] > [User Bit] > [Output Mode] setting is set to [Pulldown], the user bit will be 2:3 pulldown data. In other words, when a 23.98P or 24.00P recording is output from the HD/SD SDI terminal, the signal is converted to 59.94i / 59.94P or 60.00i / 60.00P using the 2:3 pulldown method. An external device can receive the data used in this conversion (2:3 pulldown data) to convert the signal to the original 1080/23.98P or 1080/24.00P specifications.