Inserting the Battery

Article ID: ART133802 | Date published: 05/13/2015 | Date last updated: 08/15/2015
 

Description

Inserting the Battery

Solution

Charging the Battery

Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged

Remove the cover.

Insert the battery.

After aligning the   marks on the battery and charger, insert the battery by pushing it in (1) and down (2).

Charge the battery.

For CB-2LB: Flip out the plug (1) and plug the charger into a power outlet (2).

For CB-2LBE: Plug the power cord into the charger, then plug the other end into a power outlet.

The charging lamp turns orange and charging begins.

When the charging is finished, the lamp turns green.

Remove the battery.

After unplugging the battery charger, remove the battery by pushing it in (1) and up (2).

To protect the battery and keep it in optimal condition, do not charge it continuously for more than 24 hours.

For battery chargers that use a power cord, do not attach the charger to other objects. Make sure that it can always move freely.

For details on charging time and the number of shots and recording time possible with a fully charged battery, see “Specifications” in the Getting Started guide.

 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments