Press the MENU button to display the On-Screen Menu. Use the Point buttons to select PC adjust and then press the Point or the OK button. Use the Point buttons to select the desired item and then press the OK button to display the adjustment dialog box. Use the Point buttons to adjust the setting value. Press the MENU button to display the On-Screen Menu. Use the Point buttons to select PC adjust and then press the Point or the OK button. Use the Point buttons to select the desired item and then press the OK button to display the adjustment dialog box. Use the Point buttons to adjust the setting value. Fine sync Use the Point buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31). Total dots Use the Point buttons to adjust the number of total dots in one horizontal period to match your PC image. Horizontal position Use the Point buttons to adjust the horizontal picture position. Vertical position Use the Point buttons to adjust the vertical picture position. Current mode Press the OK button to show H-sync freq. and V-sync freq. of the connected computer. Clamp Use the Point buttons to adjust the clamp level. When the image has dark bars, try this adjustment. Display area H Use the Point buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point buttons to adjust the vertical area displayed by this projector. Note: - Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu
Reset To reset the adjusted data, select Reset and press the OK button. A confirmation box appears and then select All adjustments will return to their previous figures. Mode free To clear the stored data, select Mode free and then press the Point or the OK button. Move the highlight to the Mode that you want to clear and then press the OK button Store To store the adjusted data, select Store and then press the Point or the OK button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the OK button. |