Names and Functions of Parts
The names and functions of the DR-G1130/G1100 parts are shown below.
Front View, Feeder Inlet, and Eject Outlet
 | (1) | Upper Unit |
| Open when cleaning the rollers or paper jams. |
| (2) | Imprinter Cover |
| Open when replacing the ink cartridge in the optional |
| imprinter or when cleaning the imprinter. |
| (3) | Document Eject Tray |
| Scanned documents are output here. |
| (4) | Control Panel |
| (5) | Power Switch |
| Turns the scanner ON and OFF. |
| (6) | Document Eject Tray Extension |
| Open the Document Eject Tray Extension to prevent |
| documents from falling off of the eject tray. |
| (7) | Eject Paper Stoppers |
| Adjust to fit the length of documents, to avoid document |
| spillage. |
| (8) | Document Guides |
| Adjust to fit the width of documents, so that ejected |
| documents stack neatly. |
| (9) | Document Guides |
| Adjust to fit the width of documents. |
| (10) | Document Guide Lock Lever |
| Locks the Document Guides. |
| (11) | Document Feed Tray |
| Load documents to be scanned here. |
| (12) | Document Feeder Tray Extension / Extension Wire |
| Extend as needed to fit the length of the documents. |
| | |
|  | CAUTION |
| | Do not open the imprinter cover if the optional imprinter |
| | is not installed. |
Rear View
 | (1) | Ventilation Holes (Exhaust Fan) |
| Exhausts heat from inside the scanner. |
| (2) | Power Connector |
| Connect the supplied power cord here. |
| (3) | USB Connector (Type B) |
| Connect the supplied USB cable here. |
| | |
|  | CAUTION |
| | Do not block the ventilation holes. Doing so could cause |
| | the scanner to overheat, creating a fire hazard. |
Control Panel
 | (1) | Display Panel |
| Displays the user mode, job info, messages, and counter. |
| (2) | Count Clear Key |
| Clears and resets the counter on the display panel. |
| (3) | Enter Key |
| Selects the user mode, and accepts settings. |
| (4) | < > Keys |
| Selects the user mode and job. |
| (5) | Menu Key |
| Displays the user mode. |
| (6) | Job Key |
| Selects jobs. |
| (7) | Count Only Key |
| Feeds and counts the number of document pages. |
| (8) | Separation Off Key |
| Raises the Document Feed Tray for the non-separating |
| (manual) mode. |
| (9) | New File Key |
| When File Separation by Key is enabled, separates files. |
| (10) | Start Key |
| Starts scanning. |
| (11) | Stop Key |
| Stops the scanning process. |
