Procedure for using the optional rechargeable battery kit PowerShot A60

Article ID: ART153787 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Procedure for using the optional rechargeable battery kit PowerShot A60

Solution

Using the Optional Battery Kits

Using Rechargeable Batteries (Battery and Charger Kit CBK100)

Included are the battery charger and four rechargeable AA-size NiMH (nickel metal hydride) batteries. Charge batteries as shown below.

The indicator blinks while charging, then comes on solid when charging is finished.

  • This charger can be used only to charge Canon AA-size NiMH batteries. Please do not attempt to charge any other type of batteries with this charger.
  • Never mix new batteries together with batteries that have been used in other devices.
  • When recharging batteries from the camera, always recharge all four of them at the same time.
  • All batteries you place in the charger should be at approximately the same charge state, and should have been purchased at the same time. Don't mix batteries with different purchase dates or different charge states.
  • Do not attempt to recharge fully charged batteries, as doing so may reduce or impair battery performance. Also, do not charge batteries for more than 24 consecutive hours.
  • Do not recharge batteries in enclosed areas that tend to retain heat.
  • Repeatedly recharging batteries before they become fully depleted may cause batteries to lose capacity. Do not recharge the batteries until the LCD monitor displays the [Change the batteries] message.
  • Wipe the battery terminals well with a dry cloth in the following situations, as the terminals may be soiled with oil from one's skin or other dirt:

If any of the following conditions are noticed in reference to battery life:

  • Battery usage time has considerably diminished
  • The number of recordable images has considerably diminished
  • The charging cycle does not start immediately when charging the batteries (must insert and remove the batteries two or three times before charging begins)
  • When charging completes in a matter of a few minutes (the battery charger indicator remains lit)

Consider the following usage patterns which may affect the battery's life:

  • You may not be able to fully charge the batteries due to their specifications right after purchase or after long periods of non-use. If this happens, use the batteries until their charge is depleted before charging them again. After doing this several times, battery performance will be restored.
  • Since storing a fully charged battery pack for long periods of time (about 1 year) can shorten its lifecycle or affect performance, you are recommended to use the battery pack in the camera until it is completely discharged and to store it at normal temperature (23o C/73o F) or less. If you do not use the battery pack for long periods of time, charge it fully and discharge it fully in the camera at least once a year before returning it to storage.
  • If battery usage time is considerably low despite their terminals being wiped and the battery charger's indicator remaining lit, it is possible that the batteries have reached the end of their lifespan. Switch to different, unused batteries. If you are purchasing new batteries, look for Canon's AA-size NiMH batteries (four piece set).
  • Leaving batteries in the camera or charger may damage it causing battery leakage. Remove batteries from the camera or charger and store in a dry cool location when not in use.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments