Set Envelopes Correctly i860 / i950 / i960
Article ID: ART159798 |
| |
Date published: 06/09/2015 |
| |
Date last updated: 08/18/2015 |
Description
Instructions to load envelopes correctly.
Solution
Envelopes should be loaded correctly into the printer to avoid paper jams and ensure correct operation of the printer.
Preparation for Printing
- Before setting envelopes, press down on all four corners and edges of the envelopes to remove curls and bends, as well as any air contained.
- The flap of the envelope should be straightened if bent. If the envelope is curled, hold the opposite corners and gently bend them in the opposite direction.
- If the leading edge of the envelope is puffed or curled up, use a pen, etc. to press the envelope flat and sharpen the crease.
Note: Press the envelope completely flat, working from the middle to the edge.
- Ensure that the flap of the envelope is perfectly straight.
Note: If the leading edge of an envelope is puffed up or curled, use a pen to press the envelope flat and sharpen the crease. Press the envelope completely flat, working from the middle to the edge.
Caution: The envelopes may jam in the printer if they are not completely flat and the edges are not aligned. Ensure that no curl or puff exceeds 3 mm (0.1 in).
Return to top
Unsuitable Envelopes
- Envelopes with an embossed or treated surface
-
Envelopes with a double flap or pressure seals
Return to top
Loading
- Place envelopes lengthwise with the flap to the left and the address side facing upwards.
*i860 shown
- A maximum of 10 envelopes can be loaded at once.
- If the envelopes do not feed properly, even after removing curl, clean the paper feed roller.
Return to top
Printer Driver Settings
- Media Type : Envelope
- Page Size: Select either DL Env. or #10 Env. according to the envelope size you are using
- Orientation: Landscape
Return to top