Article ID: ART114746 |
| |
Date published: 05/11/2015 |
| |
Date last updated: 10/30/2015 |
Description
Borders appear in borderless printing (iPF6400SE)
Solution
Borders appear in borderless printing (iPF6400SE) ID
:
8202045600
_
EN
_
1
|
Solution |
Cause | Corrective Action |
When executing borderless printing on A1 (594 mm) or A2 (420 mm) rolls, the Spacer for Borderless Printing was not attached to the Roll Holder. | For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll Holder. |
The paper selected for borderless printing at actual size was wider than the actual page size. | For borderless printing at actual size, use roll paper that has the same width as the actual page size. |
The printing image data has margins. | Check that the printing image data does not have any objects like crop marks and transparent objects. |
Margins are configured in the application software you are using. | Check that no margins are configured in the application software you are using. |
BordlessOversize is set to Little in the Control Panel menu. | Set BordlessOversize to Standard in the Control Panel menu. |
|