How to Charge the Battery Using the Cradle
When charging with the cradle (sold separately):
- Fully insert the AC plug of the Universal AC Adapter into the power source.
- Fully insert the DC plug of the Universal AC Adapter into the cradle's AC Adapter Connector.
AC Adapter Connector (Cradle):
- Set the printer, with the battery installed, to the cradle.
- The three charge lamps start blinking simultaneously, and the battery charging process starts. (For the charge lamp position, see the image below.)
Charge Lamp (Cradle):
Indication of Charge Lamps
Number
|
Charge Lamps
|
Status
|
<1>
|
All three blinking
|
Charging in progress
|
<2>
|
All three lit
|
Charging almost complete
|
<3>
|
All three unlit
|
Charging complete
|
When the three charge lamps change from lit to unlit, the battery charging process is completed.
Note:
- Charge the battery in a location where the temperatures are between 5 to 35 degrees Celsius (41 F to 95 F). If outside this range, charging may not be possible, or charging performance may be affected.
- In a low temperature environment, the charging process may require more time.
- During the battery charging process, even if the printer is powered off, the charge lamps may blink or light to indicate that charging is being performed.