Making copies using the Multi-Purpose Tray-ICMF 8100
Article ID: ART126174 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/14/2015 |
Description
Making copies using the Multi-Purpose Tray
Solution
Making copies using the Multi-Purpose Tray
- When making copies on LTR-size paper after having continuously copied on paper smaller than LTR-size paper, the copies may be dirty. To prevent copies from being dirty, wait about 1 minute before making copies.
- When making copies of a small size or heavy paper* , etc., the copy speed may be slightly slower than usual.
* The paper type should be selected in the Menu.
- If you intend to make a copy and print with a thermal transfer printer using the same sheet of paper, make the copy first. Failure to do so may make copies dirty or cause a paper jam.
- When copying onto transparencies, remove each transparency from the output tray as it is output.
- Place the document on the platen glass or load it in the ADF.
- Press <Copy>.
- Use the numeric keys to enter the number of copies. You can set up to 99 copies.
-
Adjust any necessary settings for your document.
- Specify the size and the type of the paper you load in the cassette or the multi-purpose tray.
- Press <Image Quality> to select the scanning resolution.
- Press <Exposure> to select the scanning exposure.
- Press <Enlarge/Reduce> to select the copy ratio.
- Press <Paper Select>.
- Use <> or <> to select [MP TRAY], and then press <Set>.
-
Press <B&W Start> or <Color Start>.
- To cancel copying, press <Stop/Reset>, then follow the instructions on the LCD. You can also cancel copying using <Status Monitor>.
- When you cancel copying while scanning a document from the ADF, the document may jam in the ADF. If the paper jam occurs, the LCD displays [CHECK DOCUMENT], or [DOCUMENT TOO LONG].